4 Channel Flysky receiver FS2A that uses the AFHDS 2A protocol for use with transmitters such as the Flysky FS-i6. Can also bind with multi-protocol module transmitters that support “FlSky2A”, see instructions below. You can select a pre-soldered & heat shrunk receiver or select one to solder yourself which comes with the servo pins and heatshrink separate from the board and you can solder wires directly to save weight if you wish. Rated up to 10V so can be ran with a 2S lipo (8.4V fully charged) without a BEC. Includes clear heat shrink. Full binding/failsafing/mixing guide here. CAD: STEP, SLDPRT. With pins STEP (thanks Shakey!) Binding & Failsafing instructions below. Note some unsoldered receivers are ‘old style’ – see below for failsafing.
