v2: slimmer & lighter form factor, pre-programmed with center braking! This ESC is designed to easily run one 775 or two 550 style drill motors or one scooter motor (for axes etc) at up to 6S with 100A peak, it’s a great value featherweight drive ESC. 6S lipo support – we recommend 3-5S for our 18V drill motors Only 52g in weight & 13mm at max thickness for easily fitting in tight spaces! Can drive two 550 drill motors per ESC – two of these ESCs are well suited for 2 or 4 wheel drive. Center braking for improved driving experience Failsafing – no unexpected movement when transmitter is off / loses signal Safe start – stick must be centered to arm Built in 5V 3A BEC – for powering receivers etc. Do not use two BECs at a time – if using two ESCs cut the red servo connector wire on one of them, if using an external BEC, cut both. Circuit diagrams, LED & Wiring Instructions below. CAD: v2: STEP, f3d (thanks Steve). v1: f3d (thanks Jeremy). These ESCs are used reliably on many featherweight robots, for example: drill drive on Couch Potato XL, Mucha Lucha, Kyrkja and scooter weapon motor on Dullahan, Untitled Goose Robot and Grab Crab XL.
